page_banner

news

Sourcing Cosmetic Fridges for Thailand: TISI Certification, Heat-Resistant Performance and Bangkok Beauty Retail Trends

TL;DR

  • The deciding number is the storage band, not the litre count. Our published guidance gives 5 to 15 °C for masks, 10 to 18 °C for creams, 10 to 15 °C for essences and perfume, 10 to 25 °C for lipstick and oils.
  • Heat performance is arithmetic. Published cooling reaches roughly 16 to 20 °C below ambient and cannot reach zero, so the set point is the ambient minus that delta.
  • TISI is the part to start early. Our certificate list covers CCC, CE-EMC, CE-LVD, ETL, FCC, PSE, SAA and UKCA, but not TISI, so the Thai mark is taken per project rather than held as stock.
  • The safety standard to require is IEC 60335-2-24, and the importer’s file is the test report, the declaration of conformity and the Thai label.
  • The MFA series runs 6L to 26L in ABS with a glass door, a digital set point and single or double cooling, on AC 100 to 240V and DC 12V, from 500 pieces.

Thailand is where the storage question stops being a feature conversation. In a cooled European store a cosmetic fridge holds a product at roughly room temperature; in Bangkok the cabinet works against the room. That is why the first question from a Thai distributor is not “how many litres” but “what does it hold on a hot afternoon”, and the answer has to show the ambient, the delta and the band together.

Three things decide the order: the storage band each category needs, the heat performance in a hot shop, and the certification route into Thailand. They are set out here in that order, including the one place where our certificate set does not answer the question.

What a Bangkok beauty counter actually asks for

The counter is the display, the stock room and the proof of quality in one piece of furniture, and each job pulls the spec differently. As a display, the cabinet has to match the counter and hold the range being pushed this month, which is why our cosmetic fridge range publishes custom colour, logo and colour box. As stock, it needs removable shelves, because staff refill it between customers.

As proof of quality, it has to be visible and adjustable. The published MFA mini skincare fridge with digital display and glass door carries a digital control for the temperature, an on and off button, and a choice of single cooling or double cooling. That last option is what a multi-category counter asks about first: one zone for creams at 10 to 18 °C and a second kept separately for drinks, so one footprint serves both a beauty counter and a refreshment corner.

Map the channel before the model. A permanent counter in an air-conditioned store, a specialty store cabinet doing three jobs and a mall pop-up with no fixed mains position are three different specifications, and the DC 12V version with two cables and a carry handle is built for the third. Because the room you sell in decides the cabinet, so the channel plan belongs in the specification. We publish no Thai retail market sizing, so use your own store count.

The storage bands that decide the model

Our application guidance publishes a recommended temperature band for each cosmetic category, and that table is the most useful document in the conversation with a Thai buyer. It is also what makes the heat arithmetic concrete, because each band is a different demand on the cabinet.

Table 1. Published storage bands by cosmetic category.
Category Published band Published reason What it asks of the cabinet
Mask 5 to 15 °C Shrinks pores The coldest band, first to fall out of reach in a hot room
Cream 10 to 18 °C Keeps the product fresh The widest window, so it survives most placements
Essence 10 to 15 °C Improves efficacy A narrow band, where a default set point fails first
Perfume 10 to 15 °C Stays non-volatile Needs stability rather than cold
Lipstick and oils 10 to 25 °C Prevents softening when hot The most forgiving band, so it can share a unit
Nail colour 10 to 25 °C Easier to apply A workroom condition, not a shelf condition

Two published constraints sit outside the table and matter as much. Our application guidance states that the air cooling system is fully dry and bacteria-inhibiting and that the refrigeration is semiconductor based, which is why the professional storage figure quoted for skin care is 10 °C rather than a freezer temperature. The same page is explicit that this cabinet is not for frozen goods, chemicals, fresh and meat. Because a cosmetic cabinet is a controlled-temperature display, not a cold store, so a buyer wanting frozen or chemical storage is asking for a different machine.

Heat-resistant performance: doing the arithmetic on a hot shop floor

Our published cooling specification is that the semiconductor cooling reaches approximately 16 to 20 °C below ambient, and that it cannot reach zero. That one line decides whether a Thai counter works, and the arithmetic is worth doing in front of the buyer rather than after the first summer.

Take a shop running at 30 °C as an example rather than a claim about Bangkok. Subtract the published 16 to 20 °C delta and the cabinet reaches 10 to 14 °C. At that ambient the mask band of 5 to 15 °C is only partly reachable and the essence and perfume bands of 10 to 15 °C sit at the bottom of the range, so the set point matters more than the model. Add 4 °C of ambient and the same cabinet starts at 14 to 18 °C, which keeps creams inside their band and puts masks out of reach.

Three published design features decide how much of that delta survives, and they are the checklist for where the cabinet may sit. High density EPS insulation is published across the skincare range and is the first defence. The glass door is the second and the weakest surface, so a unit against a hot shopfront does the same job with less margin. The digital set point is the third: a unit staff can adjust stays inside the band. Because the cooling is dry and semiconductor based, there is no defrost cycle and no frost to clear.

Blue rounded mini skincare fridge with a carry handle on top, a closed front door, side ventilation slots and moulded feet, photographed against a plain white studio background
A cabinet from the published range, in the carry-handle format that suits a pop-up counter or roadshow table. The colour is a custom-colour option; the digital set point, the cooling type and the plug are confirmed on the packing list, not inferred from the shot.

TISI: what has to be true before the first container

Start with the honest position, because a Thai buyer will check it. Our published certificate list covers safety regulations (CCC, CE-EMC, CE-LVD, ETL, FCC, PSE, SAA and UKCA), factory management systems (ISO 9001, ISO 14001, ISO 45001 and IATF 16949) and energy and food items (ERP, FDA, LFGB, REACH, RoHS and EPR registrations). TISI is not on that list, because the Thai mark is taken for the product and the programme rather than held as a standing catalogue certificate.

Thai industrial product standards run through the Department of Industrial Promotion and the Thai Industrial Standards Institute, and the standard to ask the factory to test against is IEC 60335-2-24:2025, the particular requirements for refrigerators, freezers and combination appliances. Because that standard is the safety file behind the Thai requirement, so a supplier with a current test report against it has done most of the work.

So the questions for the factory are short, and they are better asked in week one than in month four. Which entity holds the Thai mark for this model, and whether it is the importer or the factory. Whether the test report covers your model or a sibling with a different compressor and plug. Whether the marking and manual are in Thai as well as English.

One point worth raising before the quotation. Cosmetics sold in Thailand are regulated by the Thai Food and Drug Administration, and that notification and labelling sits with the party placing the product on the Thai market, the retailer or its distributor, not the fridge supplier. It matters because a counter making a freshness claim needs the product documentation and the storage band to agree.

Choosing the MFA series: capacity, cooling type and voltage

The range is deliberately narrow, and that is an advantage for a buyer who wants one file rather than five. Our published MFA series covers 6L, 10L, 15L, 20L and 26L in ABS, in white with custom colour available, all with the glass door, the digital display and the removable shelves, and all with AC 100 to 240V mains plus DC 12V, supplied with both cables. The 6L suits a counter display of creams and essences, the 10L and 15L a wider counter run, and the 20L and 26L a beauty floor or back-of-house holding.

The commercial terms are published too, and they set the scale of a first order. The category page publishes a minimum of 500 pieces with custom logo, colour and colour box available based on order quantity, and the product page publishes one piece per colour box with four pieces per carton. Because 500 pieces is the real floor for a private-label programme, so the question is how many counters that covers and how quickly it must turn over.

Plug, packaging and the retailer’s back of house

The electrical side is simpler in Thailand than in the UK. The cabinet runs on AC 100 to 240V, which covers the Thai 220V mains without a transformer, and the mains lead is a separate line item because Thailand is not a British Type G market: a fixed plug rather than a country plug has to be stated before the order.

The packaging decision is a retail decision, and it should be made with the store in the room. One piece per colour box with four pieces per carton is published, and a private-label programme can change the colour and the box, so the buyer can have a unit matching the counter finish and a carton that fits the back-of-house shelf. Because the unit is sold to the shopper and the carton is handled by staff, so the two need designing for different people.

There is a last point that decides whether the cabinet still works in month six. Our application guidance is explicit that this cabinet is not suitable for ice cream and other frozen goods, chemicals, and fresh and meat, so a store using one unit for all three will damage products and create a claim.

How to brief a Thailand order so two quotations can be compared

The brief decides whether quotations can be compared at all, and for this market it has six lines. Send these and we return the model, the storage band it holds, the certification route and the document list for the importer:

  1. Capacity and cooling type per counter. One zone or two, and how many facings the counter needs, because that fixes the 6L, 10L, 15L, 20L or 26L body.
  2. The storage band each category must hold. The category list from our application guidance, so the cabinet is quoted against a requirement, not a preference.
  3. The ambient and where the cabinet sits. Shop temperature, whether the position is against a hot shopfront or inside an air-conditioned floor, and the hours it runs daily.
  4. The voltage and the plug. AC 100 to 240V mains covers Thai 220V, the plug is stated rather than assumed, and the DC 12V lead is included if the programme covers pop-up counters.
  5. The certification file and who holds the Thai mark. Which test report covers this exact model, which entity holds the mark, and whether the marking and manual are in Thai.
  6. Branding and packaging per unit and carton. Custom colour, logo and colour box, one piece per colour box and four pieces per carton, against the published minimum of 500 pieces.

Ask for numbers rather than adjectives, and the comparison is easy: the ambient, the delta, the set point, the band. Because a quotation that cannot state the arithmetic cannot be compared with another.

Frequently Asked Questions

Do cosmetic fridges need TISI certification to be sold in Thailand?

The Thai mark is taken for the product and the programme rather than held as a standing catalogue certificate, and our published list does not include it. Ask who holds the certificate for the model you are ordering, whether the test report covers that model or a sibling, and who signs the declaration of conformity. The standard to require for a household cooling appliance is IEC 60335-2-24.

What temperature does a beauty fridge actually hold in a hot climate?

Our published cooling specification reaches approximately 16 to 20 degrees Celsius below ambient and cannot reach zero, so the set point is the shop temperature minus that delta. In a 30 degree shop the cabinet reaches roughly 10 to 14 degrees, which keeps creams inside their band but leaves masks at the cold edge of theirs. Placement, insulation and the set point decide as much as the model.

What temperature do creams, serums and perfume need in a cosmetic fridge?

Our published guidance gives a band per category: masks 5 to 15 degrees Celsius, creams 10 to 18, essences 10 to 15, perfume 10 to 15, lipstick and oils 10 to 25, and nail colour 10 to 25. The band you can hold in a hot shop decides which categories share one zone, where single and double cooling earn their place.

What is the minimum order for a private-label cosmetic fridge?

Our published minimum is 500 pieces, with custom logo, colour and colour box available based on order quantity, and a packing format of one piece per colour box with four pieces per carton. So the question is how many counters 500 pieces covers and how quickly it must turn over.

What should not be stored in a cosmetic fridge?

Our published application guidance is explicit: ice cream and other frozen goods, chemicals, and fresh and meat are not suitable. This cabinet is a controlled-temperature display for cosmetics, and a dry, bacteria-inhibiting environment rather than a cold store. A counter needing frozen or chemical storage needs a different machine, and that is cheaper to establish at quotation stage.

Miya

Business Manager at Ningbo Iceberg

Miya is a Business Manager at Ningbo Iceberg, a manufacturer of mini refrigerators, beauty refrigerators, outdoor car refrigerators, cooler boxes and ice makers. With more than ten years in product export across those categories, she works on OEM and ODM programs, custom mold development, global sourcing and international trade compliance, supporting importers with market-entry paperwork and certification files from specification to container loading.

Facebook · About Ningbo Iceberg · Contact


Post time: Nov-17-2026